Canon imageRUNNER 2030i Copying Manual page 75

■ If No Finishing Mode Is Set:
If the Collate, Group, and Staple modes are not set, copies are output as follows:
2
■ If the Rotate Mode Is Set:
If the copies are of the same size, the sheets are automatically collated into sets arranged
in page order, and are output in alternating directions as follows:
IMPORTANT
[Rotate] can be selected if the optional Finisher-U2 is not attached, or only the optional
Inner 2 Way Tray-E2 is attached.
■ If the Offset Mode Is Set:
The copies are slightly offset vertically in the output tray as follows:
IMPORTANT
•
[Offset] can be selected only if the machine is equipped with the optional Finisher-U2.
•
You cannot select STMTR or EXEC paper.
2-30
Collating Copies
Originals
1
2
3
4
Originals
1
2
3
4
Originals
1
2
3
4
Copies
Copies
Copies