NOTE
•
If you select [Transparency] or [Labels], make sure that you do not specify any
Finishing modes (Collate, Group, or Staple).
•
[Transparency] can be selected only if [LTR] is selected as the paper size.
•
[3-hole punch] can be selected only if [LTR] or [LTRR] is selected as the paper size.
•
For more information on paper types, see Chapter 2, "Basic Operations," in the
Reference Guide.
● If you want to select a nonstandard paper size:
❑
Press [Irreg. Size].
❑
Press [X] to specify the horizontal axis of the paper ➞ enter a value.
❑
Press [Y] to specify the vertical axis of the paper ➞ enter a value.
❑
Press [OK].
The display returns to the paper size selection screen.
2-11
Paper Selection
2