2
2-32
Collating Copies
The optional Finisher-U2 is not attached, or only
the optional Inner 2 Way Tray-E2 is attached.
● If you select [Rotate]:
❑
Press [Next] ➞ select [LTR] or [LTRR].
IMPORTANT
•
[Rotate] can be selected only in the following cases:
- If the available paper size is selected manually
- If the available paper size is loaded in both the horizontal and vertical directions
- The selected paper source must have Drawer Eligibility For APS/ADS in Common
Settings (from the Additional Functions screen) set to 'On'. (See Chapter 4,
"Customizing Settings," in the Reference Guide.)
•
When you have selected Automatic Paper Selection for the Rotate mode, make
sure to select a paper size which can be rotated. Otherwise, output will not be
rotated.
•
If there is no paper which can be rotated, output will be collated.