NOTE
•
The paper sizes/types loaded in each paper drawer are indicated by icons on the
touch panel display.
•
Icons indicating the type of paper loaded in each paper drawer can be displayed on
paper selection screens, if you store that information in the machine beforehand.
(See Chapter 4, "Customizing Settings," in the Reference Guide.)
•
indicates that the paper is loaded vertically, and
loaded horizontally. The suffix <R> (such as in LTRR), used in paper size
designations, indicates that the paper is loaded in a paper drawer or the stack
bypass horizontally.
3
For the stack bypass setting, load the paper into the stack
bypass.
The [Stack Bypass] setting screen is displayed.
NOTE
The paper size/type setting in the [Stack Bypass] setting screen is available if Stack
Bypass Standard Settings is set to 'Off' in Common Settings (from the Additional
Functions screen). If Stack Bypass Standard Settings is set to 'On', copying can be
performed only for the registered paper size and type. (See Chapter 4,
"Customizing Settings," in the Reference Guide.)
indicates that the paper is
2-9
Paper Selection
2