Canon imageRUNNER 2030i Copying Manual page 53

1
2
2
2-8
Paper Selection
Place your originals ➞ press [Paper Select].
If you want to set the size/type for the paper to be fed from the stack bypass,
proceed to step 3 without pressing [Paper Select].
If you want to set the size/type for the paper loaded in a paper drawer, proceed
to step 2 after pressing [Paper Select].
NOTE
When the feeder is closed, the paper source holding that paper size is highlighted
along with [Auto].
Select the desired paper size ➞ proceed to step 4.