Canon imageRUNNER 2030i Copying Manual page 134

The message <Erased.> appears for approximately two seconds on the touch
panel display.
The stored copy settings are erased.
NOTE
Key names are not erased. For instructions on changing a key name, see "Naming
a Memory Key," on p. 3-32.
6
Press [Cancel] ➞ [Done].
The display returns to the Copy Basic Features screen.
NOTE
When a memory key is not in use, as is the case when you delete its settings, [OK]
is grayed out, and you must press [Cancel] ➞ [Done] to complete the procedure.
3-37
Memory Keys
3