Canon imageRUNNER 2030i Copying Manual page 118

NOTE
•
To enter values in millimeters, press [mm].
•
When entering the value in millimeters, you can also use
and (Clear) to clear your entry.
•
You can change the value by pressing [-] or [+], even if you have entered the value
using - (numeric keys).
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
•
The default setting is '3/4" (18 mm)'. The maximum binding erase width that you
can set is '13/16" (20 mm)'.
5
Press (Start).
Copying starts.
NOTE
To cancel this setting, press [Special Features] ➞ [Frame Erase] ➞ [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
- (numeric keys),
3-21
Frame Erase
3