Setting The Pid Monitoring - Triax CCS 1000 S Assembly Instructions Manual

• Use the buttons to set the operating voltage for the
CA module ("3.3 V" / "5.0 V").
• Press the
—> The "Setting the PID monitoring" – "CA" menu is acti-
vated.

Setting the PID monitoring

The factory default of the PID monitoring is switched on.
If particular PIDs are not decrypted the CI module is reset.
Additionally dropouts may occur if several services are de-
crypted. To prevent this the PID monitoring can be switched
off.
Bx 4A CA
PID Check on
• Use the buttons to switch "off" or "on" the PID moni-
toring.
• Press the
—> The "Configuring the CA module" – "CA" menu is acti-
vated.
- 32 - - 32 -
button.
on / off
button.