Allocating Services Manually - Triax CCS 1000 S Assembly Instructions Manual

Allocating services manually

In this menu all services (programmes) supplied via "Tun-
er A", "Tuner B" and "ASI" can be displayed and each serv-
ice is assigned a set IP address in the "OUT-IP" menu. The
service can be accessed in the connected network using the
given IP addresses for this output in the "OUT-IP" menu.
• Using the
—> The display shows e.g.:
Meaning of the indicators in the example:
"IP 1" – IP address with the consecutive number "1"
"TV" – "Television" (type of service)
"001/016" – The 1st of 16 services is being allocated
to the IP address.
"Das Erste" – Name of the service
Further possible terms displayed:
"RA" "Radio" (type of the service)
For radio stations, the screen of the connected TV
or test receiver is darkened.
*
" " The star means that the TV or radio station se-
lected is encoded. To enable the stations, the CA
module and the appropriate smart card of the
station provider are required.
—> If a service number (e.g. "131") appears instead of
"TV" or "RA", this indicates that an unnamed station
or an undefined data stream is being received.
- 28 - - 28 -
001/016
IP 1 TV
Das Erste
buttons select the service wished.
IP 1 TV
Das Erste
001/016