Setting The Address Of The Gateway; Setting The Udp Port - Triax CCS 1000 S Assembly Instructions Manual

Setting the address of the gateway

The address of a gateway (server) can be set in this menu. If
no gateway is used you can skip this setting.
/
• Use the
◀
▶
of the IP address displayed to be set and use
the IP address wished.
• Press the
—> The "Setting the UDP port" – "UDP-PORT" menu is
activated.

Setting the UDP port

The UDP port setting is required if the cassette needs to be
reached externally to make the setting, such as from another
input frequency. This setting is intended for future functions
and can be skipped for this cassette.
/
• Use the
◀ ▶
of the port number displayed to be set and use
set the port number wished ("0" ... "65535").
• Press the
—> The "Selecting the input data stream" – "INPUT" menu
is activated.
- 18 - - 18 -
Bx 4 IP-GATEWAY
192.168. 0. 1
buttons to place the cursor under the digit
button.
Bx 4 UDP-PORT
60000
buttons to place the cursor under the digit
button.
/
to set
/
0 ... 65535
to