Assembly; Installing The Cassette; Emc Regulations - Triax CCS 1000 S Assembly Instructions Manual

3

Assembly

3.1 Installing the cassette

– Ensure the head-end station is mounted so it will not be able to vibrate.
Avoid, for example, mounting the head-end station onto a lift shaft or any
other wall or floor construction that vibrates in a similar way.
– Before installing or changing a cassette unplug the power cable from the
mains power socket.
• Remove the fastening screws
head-end station.
• Insert the cassette in this slot and push it into the housing.
• Align the cassette and apply slight pressure to connect it to the connections of
the board and the HF bus bar.
• Fasten the cassette with the screws
1
1

3.2 EMC regulations

To comply with the current EMC regulations, it is necessary to connect the
lines leading in and out of the head-end station using cable terminals.
When mounting the cassette in a head-end station which is installed in a
19" cabinet, make sure the connections leading in and out for the 19" cabi-
net are made using cable terminals.
A A
The attenuation of shielding of the connection lines must meet the require-
ments for "Class A".
C LASS CLASS
1
of an unoccupied slot from the bracket of the
1
.
0°
- 8 - - 8 -