Setting Ip Addresses For Services; Allocating Ip Addresses To Services Manually; Allocating Ip Addresses To Services Automatically - Triax CCS 1000 S Assembly Instructions Manual

Setting IP addresses for services

In this menu you set the IP address for the IP output selected.
The software allows to allocate IP addresses to 16 services
automatically in ascending order after setting the IP address.
If an already available IP address is occupied, an exclama-
tion mark " ! " appears in the first line of the display beside
the number of the IP output.

Allocating IP addresses to services manually

/
• Press the
◀ ▶
digit of the IP address to be set.
• Using the

Allocating IP addresses to services automatically

• Pressing the
ices are occupied with IP addresses in ascending order,
starting from the IP address set.
—> The display shows "auto" for a short time.
• Press the
—> The "Allocating services manually" menu is activat-
ed.
- 27 - - 27 -
IP 1 OUT-IP
227. 40. 50. 60
IP 1 ! OUT-IP
227. 40. 50. 60
buttons to position the cursor under the
buttons set the IP address wished.
button the first 16 of the present serv-
button.
/
auto