Network Setting - Triax TSS 400 SAT Quick Starting Manual

Content
Check the delivery after purchase.
Pos. Pcs Description
1 1 Converter
2
1 Power supply
3 1 Quick starting guide
- 1 User Manual (not shown)
General
With this SAT>IP converter, you can receive unencrypted (free-to-air) digital satellite (DVB-S and DVB-S2)
channels.
Different satellite FTA live channels (DVB-S and DVB-S2) can be sent out to up to 4 connected users
simultaneously. Every four connected user can chose what to watch, on the device of their choice anywhere in
the house.
A connected user can be:
- An IP Set Top Box (STB) connected on your in-home IP network (RJ-45 cable) and connected to your TV
via an HDMI cable
- A Tablet or Smartphone connected wirelessly to your home WLAN router. Therefore, you need a wireless
home network with enough bandwidth (100 Megabit/seconds) and an app preinstalled on your wireless
device. You should find on the apps store of your wireless device the SAT>IP app making that your
Tablet or Smartphone can get and display live TV.
SAT>IP will deliver you linear TV to multiple screen at home. With SAT>IP solution, you will avoid problems of
buffering and poor pictures quality as it is a satellite reception with a high bandwidth.

Network Setting:

Network Interface:
The default network interface of the SAT>IP converter is utilizing Ethernet network. Users do not need to adjust
the setting if the SAT>IP converter is installed in the Ethernet environment.
IP Settings:
Automatic or Static mode can be chosen by users in the function. The default IP setting is automatic mode. The
SAT>IP converter does not include DHCP function, so it needs to be connected to a router or switch with DHCP
function. Once the SAT>IP converter is correctly connected to a device with DHCP function, users do not need
to adjust the setting.
By default, all IP settings of your SAT>IP converter are in automatic mode making the installation very easy with
your router.