Table of Contents
Advertisement
• Press the
—> The "Setting the input symbol rate, setting the DVB
mode" – "SYMBOL" menu is activated.
Setting the input symbol rate
Setting the DVB mode
The symbol rates of the satellite transponders can be found in
the current channel table of the satellite operator, in various
satellite magazines and in the Internet.
The cassette recognizes the transmitted DVB mode and
switches over between the normal QPSK mode (DVB-S) and
the DVB-S2 mode. Receiving stations with DVB-S2 mode,
we suggest to preset the DVB mode to shorten the time for
searching stations.
D
/
27500 / 22000
Setting the input symbol rate
• Using the
"22000" can be selected directly.
• To set other symbol rates use the
the cursor under the digit of the symbol rate displayed to
be set.
• Press
to enter the respective digit of the symbol rate
needed.
• Repeat the procedure by the quantity of the digits to be set.
Setting the DVB mode
• Use the
button to place the cursor under "DVB-S" and
▶
set the required DVB-S2-mode with the
• Press the
—> The "Setting the input frequency" – "FREQ" menu is
activated.
- 20 -
- 20 -
button.
Bx 4A
SYMBOL
27500
DVB-S
button the symbol rates 27500" or
◀
button.
/
DVB-S / QPSK... /
8PSK... / DTV...
/
buttons to position
▶
buttons.
Advertisement
Table of Contents
