Table of Contents
Advertisement
In the head-end station display, the channel strips of the cassette are indicated
with "Bx ...A" ("Tuner A") or "Bx ...B" ("Tuner B"). The channel strip "Tuner A"
can decode encoded channels via a corresponding CA module. The cassette is
controlled with the head-end station control unit.
Two LEDs provide an indication of the signal quality with their colour. The quality
of the received transport stream can also be shown in the display ("C/N" menu).
In an additional menu, the transmission of DVB service information (EIT, TDT and
SDT) or teletext (TXT) can be individually activated or deactivated.
DVB service information:
EIT (Event Information Table):
For each service, event information is transmitted (such as starting time,
duration, encryption etc.)
TDT (Time Date Table):
The transmitted table contains the current time and date.
SDT (Service Description Table):
Information relating to the encryption is also sent with the name of each
service.
The LEDs for the LAN interface show whether a network connection exists and
whether a data transfer is in progress.
When the head-end station is switched on, the two-line LC display shows the
software version of the control unit.
To operate this cassette the software version of the control unit must be "V 41"
or higher. You can find the current operating software for the control unit and
the cassette, the software "BE-Flash" and the current assembly instructions on
the website "www.triax.com".
The cassette is designed for use in the following head-end stations:
– CSE 3301
– CSE 3312
2.5 Software query
Control unit
If necessary, you can activate the indication of the software version of the con-
trol unit manually:
• Press any two keys on the control unit of the head-end station simultaneously
until the display goes dark and the software version, e.g. "V 41" appears.
Cassette
After activating the cassette the software version of the cassette is displayed (s.
page 15).
– CSE 3308
– CSE 3319
- 7 -
- 7 -
Advertisement
Table of Contents
