Setting the forward error correction
• Press the
button to position the cursor under "off" .
▶
—> In position "off" the forward error correction (FEC) is
switched off.
• Using the
("off, 10/9" ... "20/19").
Setting the transmission channel
• Press the
button to position the cursor under "Annex...".
▶
• Use the
wished ("AnnexA" / "AnnexB").
Copying the settings to all IP addresses
• Pressing the
data packets", Forward error correction" and "Transmis-
sion channel" can be copied to all IP addresses.
—> The display shows "copy" for a short time.
• Press the
—> The "Setting IP addresses for services" – "OUT-IP"
menu is activated.
- 26 -
- 26 -
buttons set the value of the FEC wished
IP 1
PKTS / FEC
7
10/09
AnnexB
buttons to set the transmission channel
button the settings "Quantity of the
button.