Table of Contents
Advertisement
• Use the
• Press the
Pid
m o n i to r i n g
In this menu you can switch off the PID monitoring and call up a menu for the
settings of the CA module (dependent on the CA module).
PID monitoring:
• Use the
Menu of the CA module:
• Use the
If the station filter will be switched off in menu Station filter on/off,
all deactivated stations are activated in the Station filter – Selection
menu (+).
buttons to switch "on" or "off" the station filter.
button.
—> The "PID monitoring" – "CA" submenu is activated.
Bx
4A/B
PID Check on
—> The factory default of the PID monitoring is switched on.
If particular PIDs are not descrambled the CA module is reset. Ad-
ditionally dropouts may occur if several stations are decrypted. To
prevent this the PID monitoring can be switched off.
buttons to switch "off" or "on" the PID monitoring.
button to activate the menu of the CA module.
—> Access to this menu is only possible with installed CA module and
inserted smart card.
CA
=>
- 27 -
CC2CT 800 C
Advertisement
Table of Contents
