Denon AVR-4311 Owner's Manual page 59

Multi-channel + 2-channel
connection
You can connect the other front speakers for
2-channel playback using the DIRECT mode or
STEREO mode.
The speakers used exclusively for multichannel
playback and the speakers used exclusively for
2-channel playback are automatically switched for
playback in accordance with the surround mode.
To set the speakers for automatic switching during
playback, select "Amp Assign" and set "Assign
Mode" to "2CH" using steps 3 and 4 of "Set up
"Amp Assign"" (vpage 59).
When you connect and use both surround back and
front height speakers, either set of speakers is used
for playback depending on the surround mode of
multichannel playback.
z You can also change the 2-channel playback front speakers to SURR.BACK/AMP ASSIGN or F.HEIGHT/AMP ASSIGN speaker terminals using the "Amp
Assign" and "Assign Sp." settings (vpage 91).
For speaker impedance and speaker cable connections, see page 5.
FHL
FR
C
FL'
SW
FL
SL
SBL SBR
Multi channel playback
(Surround mode)
FHR
Switching
FR'
SR
2-channel playback
(Direct/Stereo mode)
ENGLISH
Connect
55