Network Setup - Denon AVR-4311 Owner's Manual

Network Setup

Make network settings.
Setting items
Network Connecting 1. Connect the LAN cable (vpage 26 "Connecting to a home network
Make settings for wired (LAN)").
LAN.
2. Turn on this unit (vpage 7 "Turn on power").
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the
setting in step 3.
3. Set the IP address at the "Network Connecting".
NETWORK CONNECTING
DHCP
IP Address
Exit
Detail
Set IP address and proxy manually
q On the menu, select "Network Connecting" – "Detail" and press
ENTER
.
w Use o p to set "DHCP" to "OFF", then
press i .
The DHCP function is disabled.
e Use uio p
ENTER
and press
• IP Address : Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses
are set.
CLASS A: 10.0.0.0 – 10.255.255.255
CLASS B: 172.16.0.0 – 172.31.255.255
CLASS C: 192.168.0.0 – 192.168.255.255
• Subnet Mask : When connecting an xDSL modem or terminal
adapter directly to this unit, input the subnet mask indicated in
the documentation supplied by your provider. Normally input
255.255.255.0.
• Default Gateway : When connected to a gateway (router), input its
IP address.
• Primary DNS, Secondary DNS : If there is only one DNS address
indicated in the documentation supplied by your provider, input it at
"Primary DNS". If there are two or more DNS addresses, input the
fi rst one at "Secondary DNS".
Remote control operation
buttons
Default settings are underlined.
Setting details
NETWORK CONNECTING
w
DHCP OFF
ON IP Address 192 . 168 . 100 . 019
Subnet Mask 255 . 255 . 255 . 000
192.168.100.19
Default Gateway 000 . 000 . 000 . 000
Primary DNS 000 . 000 . 000 . 000
Secondary DNS 000 . 000 . 000 . 000
Proxy
Exit r
q
Enter
RETURN
Set IP address manually
0 – 9
or to input the address
.
Move the cursor
(Up/Down/Left/Right)
Setting items
Network Connecting
r Use
(Continued)
• When connecting to the network via a Proxy server, select "Proxy" and
• If you are using a broadband router (DHCP function), there is no need
• If this unit is being used connected to a network without the DHCP
• If you cannot connect to the Internet, recheck the connections and
• If you do not understand about Internet connection, contact your ISP
• When you want to cancel the setting during IP address input, press
e
Proxy settings : Make this setting when connecting to the Internet via a
Cancel
proxy server.
q On the menu, select "Network Connecting" – "Detail" and press
w Use
e Use
Confi rm the setting
Setting details
ENTER
i to select "Exit" and press .
Setup is complete.
ENTER
press (vpage 97 "Proxy settings").
to make the settings at "IP Address" and "Proxy", since the DHCP
function is set to "ON" in this unit's default settings.
function, the network settings must be made. In this case, some
knowledge of networks is required. For details, consult a network
administrator.
settings (vpage 26).
(Internet Service Provider) or the store from which you purchased your
computer.
RETURN
.
NETWORK CONNECTING NETWORK CONNECTING
DHCP
IP Address
DHCP ON
Subnet Mask
IP Address 192.168.100.19
Default Gateway
Primary DNS
Secondary DNS
Proxy
Exit
Exit
Detail q
Enter
Set IP address and proxy manually Set if using proxy server
NETWORK CONNECTING
Proxy ON e
Proxy r Address
Address 000 . 000 . 000 . 000
00000
Port y
Exit
u
Proxy server is used
ENTER
.
ENTER
ui to set "Proxy" and press .
o p to set "Proxy" to "ON" and press
The proxy server is enabled.
Return to previous menu
ENGLISH
MANUAL SETUP
ON
192 .168 . 100 . 019
255 .255 . 255 . 000
192 .168 . 100 . 001
192 .168 . 100 . 001
000 .000 . 000 . 000
w
Enter Cancel
RETURN
t
Cancel
RETURN
i .
97