Denon AVR-4311 Owner's Manual page 62

ENGLISH
PRE AMP mode
You can connect all speakers to an external power amplifier and use
this unit as a preamplifier.
Using this unit as a preamplifier, you can perform up to 11.2-channel
playback.
When the PRE AMP mode is used, the built-in power amplifier
operation of this unit is stopped, and interference to the preamplifier
from the power amplifier can be reduced.
To use this unit as a preamplifier, select "Amp Assign" and set
"Assign Mode" to "PRE AMP" using steps 3 and 4 of "Set up "Amp
Assign"" (vpage 59).
• When the PRE AMP mode is used, the MAIN ZONE audio is not
output from the speaker terminals of this unit.
To use the speakers for multizone (ZONE2/ZONE3) in the PRE AMP
mode, set "Amp Assign" – "Assign Sp." to "ZONE2/3" (vpage 91).
This setting will output the ZONE2 audio from the surround back
speaker terminals and ZONE3 audio from the front wide speaker
terminals.
• For connecting power amplifier and speaker systems, refer to the
instruction manual supplied with the power amplifier to be used.
58
For speaker impedance and speaker cable connections, see page 5.
Power amplifier
FHL
SW1 SW2
C
FL
FWL
SL
SBL SBR
Connect
FHR
FR
FWR
SR