Denon AVR-4311 Owner's Manual page 83

Setting items
Video Mode Auto : Process video automatically based on the HDMI content
Make settings for video information.
processing. Game : Always process video appropriate for game content.
Movie : Process video normally.
z
BD DVD TV
SAT/CBL DVR
• If "Video Mode" is set to "Auto", the mode is switched according to the
GAME z V.AUX DOCK
input contents.
• If a source is played in both MAIN ZONE (audio and video) and ZONE2
(audio only) modes in the same room, audio in MAIN ZONE and ZONE2
modes may sound out of synchronization, but this is not malfunction. In
this case, setting to "Game" mode may improve audio synchronization.
Video Convert ON : The input video signal is converted.
The input video signal is OFF : The input video signal is not converted.
converted automatically
in conjunction with the
• When a non-standard video signal from a game machine or some other
connected TV (vpage 15
source is input, the video conversion function might not operate. In this
"Converting input video
case set "Video Convert" to "OFF".
signals for output (Video
• When "Video Convert" is set to "OFF", the video conversion function
conversion function)").
does not work. In this case, connect this unit and TV with the same type
z
BD DVD TV of cable.
SAT/CBL DVR
GAME z V.AUX DOCK
i/p Scaler Analog : Use i/p scaler function for analog video signal.
Convert the input source's Analog & HDMI : Use i/p scaler function for analog and HDMI video signal.
resolution to the resolution HDMI : Use i/p scaler function for HDMI video signal.
set at "Resolution". OFF : Do not use i/p scaler function.
z
BD DVD TV
• "Analog & HDMI" and "HDMI" can be set for input sources for which an
SAT/CBL DVR
HDMI input connector is assigned.
GAME z V.AUX DOCK
• Which items can be set depend on the input source assigned to each
NET/USB input connector.
• This function is not effective when the input signal is x.v.Color, 3D,
sYCC 601 color, Adobe RGB color, Adobe YCC 601 color or computer
resolution.
Remote control operation
buttons
Setting details
Move the cursor
(Up/Down/Left/Right)
Setting items
Resolution Auto : The number of pixels the TV connected to the HDMI output
Set the output resolution. connector supports is detected automatically and the appropriate output
You can set "Resolution" resolution is set.
separately for HDMI output 480p/576p / 1080i / 720p / 1080p / 1080p:24Hz : Set the output resolution.
of the analog video input
and HDMI input.
• This item can be set when "i/p Scaler" is set to anything other than
z
"OFF".
BD DVD TV
• When "i/p Scaler" is set to "Analog & HDMI", the resolution of both the
SAT/CBL DVR
analog video input signal and HDMI input signal can be set.
GAME z V.AUX DOCK
• To watch 1080p/24Hz pictures, use a TV that supports 1080p/24Hz video
NET/USB signals.
• When set to "1080p:24Hz", you can enjoy film-like pictures for film
sources (in 24 Hz). For video sources and mixed sources, we recommend
setting the resolution to "1080p".
• It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output
at a resolution of 1080p/50Hz.
Progressive Mode Auto : The video signal is automatically detected and the appropriate
Set an appropriate mode is set.
progressive conversion Video1 : Select mode suitable for video playback
mode for the source video Video2 : Select mode suitable for video and 30-frame film material
signal. playback.
z
This item can be set when "i/p Scaler" is set to anything other than
BD DVD TV
"OFF".
SAT/CBL DVR
GAME z V.AUX DOCK
Full : Output at 16:9 aspect ratio.
Aspect
Set the aspect ratio for the Normal : Output at 4:3 aspect ratio.
video signals output to the
"Aspect" can be set when "i/p Scaler" is set to anything other than
HDMI.
"OFF".
z
BD DVD TV
SAT/CBL DVR
GAME z V.AUX DOCK
NET/USB
z "TV" or "GAME" can be set when "HDMI" (vpage 78) or "COMP" (vpage 78) has been assigned.
Confirm the setting
ENGLISH
SOURCE SELECT
Setting details
79
Return to previous menu