Map Settings - Alpine INE-NAV-30 Owner's Manual

5.3.4 Map settings

You can fine-tune the appearance of the Map screen. Adjust the map view to your needs, choose suitable
color themes from the list for both daytime and night use, change the blue arrow to a 3D car model, show
or hide 3D buildings, turn track logging on or off, and manage you Place visibility sets (which Places to
show on the map).
The map is always shown on the screen so that you can see the effect when you change a setting.
Button
Switch the map view between a 3D perspective view and two 2D top-down view
modes.
Adjust the basic zoom and tilt levels to your needs. Three preset levels are
available. There is also a manual mode when you can set the zoom and tilt levels
with the buttons on the left.
When selected, the map zooms out to show an overview of the surrounding area if
the next route event (maneuver) is far. When you get close to the event, the
normal map view returns.
Switch between daytime and night color modes or let the software switch between
the two modes automatically a few minutes before sunrise and a few minutes after
sunset.
Select the color scheme used in daytime mode.
Select the color scheme used in night mode.
Replace the default position marker to one of the 3D vehicle models. You can
select separate icons for different vehicle types selected for route planning.
Separate icons can be used for car and the other vehicles.
Show or suppress 3D landmarks, 3D artistic or block representations of prominent
or well-known objects.
Description
78