Setting A New Starting Position For The Route - Alpine INE-NAV-30 Owner's Manual

•
Tap to add the newly selected location as an intermediate destination to your route. The
other destinations of the route remain intact. Note: the new waypoint is placed among destinations
to keep the route optimal. To decide where a waypoint to appear, use the Edit Route feature.
•
Tap to append the newly selected destination at the end of the route. The other
destinations of the route remain intact. The previous final destination is now the last waypoint.

3.3.2 Setting a new starting position for the route

For normal navigation, all routes are planned from the current position. In order to check future routes,
simulate them or see their length in time and distance, you can turn off the GPS receiver. Then you can
set the starting point of the route to a different location than the current GPS position.
1. In the Navigation menu, tap
2. If you already have a route, tap
3. The first line is the start of the route, normally the current GPS position. Tap
your action at the warning message.
.
. If you are starting a new route, tap
56
.
and confirm