Alpine INE-NAV-30 Owner's Manual page 192

•
Maneuver restrictions and directional constraints are taken into account when planning a
route.
•
Roads are used only if access for buses is allowed.
•
Private roads, resident-only roads and walkways are excluded from routes.
•
•
Maneuver restrictions and directional constraints are taken into account when planning a
route.
•
Roads are used only if access for taxis is allowed.
•
Private roads, resident-only roads and walkways are excluded from routes.
Route Planning Method types:
Button
:
Gives a quick route if you can travel at or near the speed limit on all roads. Usually
the best selection for fast and normal cars.
Gives a short route to minimize the distance to travel. It can be practical for slow
vehicles. Searching for a short route regardless of the speed, this route type is
rarely practical for normal vehicles.
Gives a quick but fuel efficient route based on the fuel consumption data given in
Route settings (page 74). Travel cost and CO
estimations only. They cannot take elevations, curves and traffic conditions into
account.
Results in a route with fewer turns and no difficult maneuvers. With this option, you
can make your software to take, for example, the freeway instead of a series of
smaller roads or streets.
Description
77
emission calculations are
2