Alpine INE-NAV-30 Owner's Manual page 111

Connection of a Mobile Digital TV Receiver/USB Player and DVD Changer
Camera Connector
AUX/PRE OUT cable
(Yellow)
(Red)
(White)
REMOTE OUT
(Brown)
Camera cable
1 Video/Audio Input Connectors (AUX INPUT)
2 RCA Extension Cable (Sold Separately)
3 Remote Control Output Lead (Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
• You can connect one more external input device only when the "Primary Name" is set to "DVB-T" or "USB Player." Refer to "Setting the Primary
AUX Name (AUX Setup)" (page 57).
• To connect an external input device to the iPod VIDEO connector, set "AUX3 In Sel." to "AUX3. " Refer to "Setting the AUX3" (page 57).
AUX/PRE OUT Connector
To Video Output terminal
Mobile Digital
TV Receiver
(Sold
separately)
To Audio Output Terminal
REMOTE IN
(White/Brown)
4 AV/RCA interface cable (4-pole mini AV plug to 3-
5 Video/Audio Input Connectors
To Video Output terminal
To Audio Output terminal
iPod VIDEO input connector
To Video Input Terminal
To Audio Input To Audio Output
Terminal Terminal
REMOTE OUT REMOTE IN
(White/Brown) (White/Brown)
RCA) (sold separately)
YELLOW is for input video, RED is right and WHITE is left
input the audio.
DVD Player
(sold separately)
DVE-5207, etc.
To Video Output terminal
DVD Changer
(Sold
separately)
111
-EN