Alpine INE-NAV-30 Owner's Manual page 229
In-dash gps navigation receiver / 8-inch in-dash gps navigation receiver
Hide thumbs
Also See for INE-NAV-30:
- Owner's manual (116 pages) ,
- Manuel du propriétaire (116 pages) ,
- Manual de usuario (115 pages)
Table of Contents
Advertisement
Updating Map database for these units involves four main steps with each step including detailed steps
as described in the procedure below. Based on your model, you will need an empty SD or Micro SD card
with at least 4GB capacity, and a PC with Windows XP, 7 or 8 with a SD card reader slot.
Step 1. Download and install the
1.1) Register at Alpine
the top right. Select "Alpine of America" and your device model when prompted. This will allow
your device to be recognized automatically by the tools for update later.
https://alpine.naviextras.com/
1.2) Download and install the
whenever prompted).
https://alpine.naviextras.com/shop/portal/downloads
1.3) After installation,
successful installation of the tool above, proceed to the Step 2.
Alpine Map Update Manual
(INE-S920HD/W927HD/Z928HD)
"NaviExtras
N aviExtras
website below by selecting "Register" on the drop down menu on
"NaviExtras
Toolbox" from the link below (select your device model
"NaviExtras
Toolbox" should start up with a screen like the one below. After a
Toolbox" on your PC.
Advertisement
Chapters
Table of Contents
