Alpine INE-NAV-30 Owner's Manual page 230

Step 2. Get device information from your Head Unit onto an SD card.
This step will retrieve your device specific information onto a SD card, so that
recognize your unit and offer available updates correctly. You need an empty 4GB SD card for this step.
2.1) Copy the "autorun" directory onto an empty SD card. The folder "autorun" needs to be in root
directory of the SD card.
2.2) Safely remove the SD card from your PC and insert it into the SD slot of your Head Unit.
Note: The SD slot for INE-S920HD is located behind a detachable panel. For INE-W927HD and
INE-Z928HD, it is located behind the motorized display.
2.3) After a few seconds, the
following screen. Press the button "Collect device information". System will copy a few files and
folders onto the SD card.
2.4) Press "Ok" when "Update or Backup successfully completed without errors" message appears. It
will then go back to the initial screen above. Then press "Quit" and select "Yes" to confirm.
Synctool of the head unit should start up automatically and display the
"NaviExtras Toolbox" will