Navigate To A Location Stored In A Picture - Alpine INE-NAV-30 Owner's Manual

3.1.8 Navigate to a location stored in a picture

You can also set the location stored in a picture as your destination. Do as follows:
1. In the Navigation menu, tap
2. Open the
3. The list of picutres stored on the microSD card appears. Select one picture from the list.
4. A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
destination.
5. After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
Note!
Only geotagged JPG files contain location information. That is why these kind of files can
only be used in navigation. Other picture files do not appear in the list.
Files must be located on an inserted microSD card, in a "pictures" folder.
.
menu and tap
to confirm the destination, or tap
and start your journey.
.
) appears at the new location. Tap
to modify route parameters, or tap
53
to select a different