Alpine INE-NAV-30 Owner's Manual page 188

You can control the volume of the following sound types:
Button
Controls for each sound type:
Button
Volume slider
Maps may contain information about the speed limits of the road segments. The
software is able to warn you if you exceed the current limit. This information may
not be available for your region (ask your local dealer), or may not be fully correct
for all roads in the map. This setting lets you decide whether you wish to receive
visible and/or audible warnings.
Adjust the slider to set the relative speed above which the application initiates the
warning.
The following warning types are available:
•
Audio warning: you receive a verbal warning when you exceed the speed
limit with the given percentage.
•
Visual warning: the current speed limit is shown on the map when you
exceed it.
If you prefer to see the speed limit sign on the map all the time (normally it is
shown only if your speed exceeds it), you can set it here.
Maps may contain driver alert information. Tap this button to turn on or off these
warnings and to set the distance from the hazard to receive the warning at. These
can be set individually for the different warning types.
These controls affect the volume of the guidance sounds (verbal instructions).
Turn off the attention tone preceding verbal instructions or adjust its volume.
These controls affect the volume of the alert sounds (beeps).
Key sounds provide audible confirmation of tapping the touch screen. These
controls affect key sounds.
Use the switch to mute the related sound. The slider becomes inactive. Tap again
to re-enable.
Adjusts the volume of the related sound.
Description
Description
73