Map Settings - Alpine X009E Owner's Manual

5.3.5 Map settings

You can fine-tune the appearance of the Map screen. Adjust the map view
to your needs, choose suitable colour themes from the list for both daytime
and night use, change the blue arrow to a 3D car model, show or hide 3D
buildings, turn track logging on or off, and manage you Place visibility sets
(which Places to show on the map).
The map is always shown on the screen so that you can see the effect
when you change a setting.
Gives a short route to minimise the distance to travel.
It can be practical for slow vehicles. Searching for a
short route regardless of the speed, this route type is
rarely practical for normal vehicles.
Gives a quick but fuel efficient route based on the fuel
consumption data given in Route settings (page 96).
Travel cost and CO
estimations only. They cannot take elevations, curves
and traffic conditions into account.
Results in a route with fewer turns and no difficult
manoeuvres. With this option, you can make your
software to take, for example, the motorway instead of
a series of smaller roads or streets.
100
emission calculations are
2