Source Layout Setting; Setting The Slide Source Change; Setting The Easy Sound Setup Position; Customizing The Source Banner - Alpine X800D-U Owner's Manual

Source Layout Setting

[Source Layout] is selected on the Source setup menu in step 3.
Refer to "Source Setup Operation" (page 59).

Setting the Slide Source Change

You can set whether to switch sources by swiping from the designated
area of the Audio/Visual Playback screen from right to left or from left
to right. Refer to "Switching Sources" (page 28).
Setting item: Slide Source Change
Setting contents: On (Initial setting) / Off
On: Source is changed by a swipe gesture.
Off: Source is not changed by a swipe gesture.

Setting the Easy Sound Setup Position

You can select this menu displayed on left or right of screen.
Setting item: Sound Setup Position
Setting contents: Left (Initial setting) / Right

Customizing the Source Banner

You can customize the Source Banner order as you prefer. The source
switching order is displayed according to your changes.
Setting item: Source Banner Customize
Take adjusting the order of Disc and AUX-1 as an
example:
1
Touch the desired source icon ([Disc] etc.).
The [Disc] source icon is displayed highlighted.
Touch this icon again to cancel.
2
Touch another source icon ([AUX-1] etc.).
The Source Banner positions for [Disc] and [AUX-1] are
swapped.
60
-EN

Disc Setting

Touch [Disc] on the Source setup menu in step 3. Refer to "Source
Setup Operation" (page 59).
• You can perform DVD setup in DVD video mode.
• Touch [Stop] before performing Disc setup.

Changing the language setting

The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is convenient
if you always want to listen in English, for example. (The language
setting is not effective on some discs. In this case, the default language
is set at the factory.)
• When the settings are changed, old settings are overwritten. Make a
note of the current settings before making changes.
• To temporarily change the language of the current disc, either do so
from the DVD menu or by using the operation described in the
section "Switching the Audio Tracks" (page 46).
• If the disc does not include the selected language, the disc's default
language is set.
To play in a language other than those displayed
1 Touch [DVD Menu Language Code], [Audio Language
Code] or [SUBT Language Code].
The numeric keypad screen is displayed.
2 Touch the 4-digit numeral of the language number.
To reference language numbers, refer to "List of
Language Codes" (page 96).
3 Touch [OK] to memorise the number.
• The setting content changes to "Other" if the desired language code
is input.

Setting of the Menu Language

Set the language used for the menus (title menu, etc.).
Setting item: DVD Menu Language
Setting contents: Auto (Initial setting) / EN / JP / DE / ES / FR / IT /
SE / RU / CN
• When "Auto" is selected, the primary menu language among the
recorded ones is played.
• As for the language abbreviation, refer to "List of Language Codes"
(page 96).

Setting of the Audio Language

Set the audio language produced from the speakers.
Setting item: Audio Language
Setting contents: Auto (Initial setting) / EN / JP / DE / ES / FR / IT /
SE / RU / CN
• When "Auto" is selected, the primary audio language among the
recorded ones is applied.
• As for the language abbreviation, refer to "List of Language Codes"
(page 96).