Four Slot Battery Charger
This section describes how to use the Four Slot Battery Charger to charge up to four MC75 batteries.
MC75 Battery Shim Installation
Before charging a spare battery, snap the MC75 shim into the battery slot as shown in
MC75 Battery Shim Installation
Figure 6-9
NOTE To purchase additional shims, contact your local account manager or Motorola, Inc. Part number:
KT-76490-01R.
Spare Battery Charging
Connect the charger to a power source.
1.
Insert the spare battery into a spare battery charging well and gently press down on the battery to ensure
2.
proper contact.
Shim
Accessories
6 - 9
Figure
6-9.