Getting Started; Installation; Removal - Motorola MC75 User Manual

Debit Card Reader
The DCR7X00-100R Debit Card Reader (DCR) snaps onto the bottom of the MC70/MC75 mobile computer to
allow easy data capture with the swipe of a magnetic stripe card and personal identification number (PIN) entry
using a numeric keypad. This guide describes how to install and use the DCR.

Getting Started

When using the DCR for the first time, charge the DCR in a cradle for a minimum of three hours.

Installation

Align the DCR with the bottom of the MC75 and push up until the locking tabs snap into place.
1.
DCR Installation
Figure 6-13
Pull on the DCR to ensure it is securely connected to the MC75.
2.

Removal

To remove the DCR from the MC75, push in the bottom of the two locking tabs and pull the DCR from the MC75.
Accessories 6 - 13