Performing A Warm Boot; Performing A Cold Boot; Waking The Mc75 - Motorola MC75 User Manual

2 - 14 MC75 User Guide
Resetting the MC75
There are two reset functions, warm boot and cold boot. A warm boot restarts the MC75 by closing all running
programs. A cold boot also restarts the MC75, and also resets the clock. Data saved in flash memory or a memory
card is not lost.
If the MC75 is not functioning properly, perform a warm boot first. If the MC75 still does not respond, perform a cold
boot.

Performing a Warm Boot

Hold down the Power button for approximately five seconds. As soon as the MC75 starts to boot release the
Power button.

Performing a Cold Boot

To perform a cold boot simultaneously press the Power button and the 1 and 9 keys.

Waking the MC75

The wake-up conditions define what actions wake up the mobile computer after it has gone into suspend mode.
The mobile computer can go into suspend mode by either pressing the Power button or automatically by Control
Panel time-out settings. These settings are configurable and the factory default settings are shown in
subject to change/update.
Wake-up Default Settings
Table 2-7
Condition for Wake-up
AC power is applied.
Mobile computer is inserted into a cradle.
Mobile computer is removed from a cradle.
Mobile computer is connected to a USB device.
Mobile computer is disconnected from a USB device.
A key is pressed.
The scan triggered is pressed.
The screen is touched.
Audio Jack
Audio Btn
Bluetooth communication
Incoming phone call
Power Button
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Table 2-7 are
Automatic Time-out
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes