Motorola MC75 User Manual page 162

7 - 6 MC75 User Guide
Troubleshooting the MC75 (Continued)
Table 7-1
Problem
MC75 shuts off.
Tapping the window
buttons or icons does
not activate the
corresponding feature.
A message appears
stating that the MC75
memory is full.
MC75 keeps powering
down to protect
memory contents.
Cause
MC75 is inactive. The MC75 turns off after a period of inactivity. If the MC75 is
running on battery power, set this period from 1 to 5 minutes, in
one-minute intervals. If the MC75 is running on external power, set
this period to 1, 2, 5, 10, 15, or 30 minutes.
Check the Power window by selecting
and tapping the
the setting for a longer delay before the automatic shutoff feature
activates.
Battery is depleted. Replace the battery.
Battery is not Insert the battery properly. See
inserted properly. 1-6.
Screen is not Re-calibrate the screen. See
calibrated correctly.
The system is not Warm boot the system. See
responding.
Too many files Delete unused memos and records. If necessary, save these
stored on the MC75. records on the host computer (or use an SD card for additional
memory).
Too many Remove user-installed applications on the MC75 to recover
applications memory. Select
installed on the
Programs
MC75.
The MC75's battery Recharge the battery.
is low.
The internal Because this mode requires battery power, power it off when not
Bluetooth radio is needed.
powered on for a
long time.
Solution
icon. Select the
Power
Installing the Main Battery on page
Calibrating the Screen on page
Resetting the MC75 on page
> >
Start Settings System
icon. Select the unused program and tap Remove.
> > tab
Start Settings System
tab and change
Advanced
1-8.
2-14.
tab and tap the
Remove