6 - 16 MC75 User Guide
Keypad Key Descriptions
Table 6-4
Key
Numeric
Cancel
Clear
Enter
Display Messages
The follow messages may appear on the DCR display:
ENTER PIN - A PIN is required to complete the transaction.
PIN ERR - The entered PIN is not between 4 and 12 characters.
CANCELED - The transaction was cancelled by the user.
COMPLETE - The transaction was completed.
KEYCLEAR - The DCR was tampered with or the battery completely discharged. The DCR must have the key
re-injected. See your system administrator.
BATT OK - Battery is significantly charged.
BATT LOW - Battery charge is low. Re-charge as soon as possible.
STAND BY - DCR is performing a firmware check. This occurs if it has been powered off for more than 24 hours.
Check the DCR Battery Level
When the DCR is not used for extended periods of time or in storage it must be charged periodically to maintain the
battery charge. Motorola recommends charging the DCR once every three months.
If the DCR battery fully discharges the debit function will be inoperable but the MSR will still function for credit card
transactions. Return the DCR for service.
NOTE While the DCR is being used in normal operation (application is accessing the DCR port), the DCR charges
from the MC75.
To check the battery level:
Remove the DCR from the MC75.
1.
Press and hold the
2.
•
BATT OK - Battery is significantly charged
Used to enter PIN.
Cancels the current transaction.
Clears the entered data.
Submits the entered data.
key until the battery status displays on the DCR display.
5
Description