Using Redial Key For "Last Number Redial - Aastra 6731i User Manual

Additional Features
Configuring Incoming Intercom Settings
Aastra Web UI
Use the following procedure to configure incoming Intercom settings on the IP phone:
1. Click on Basic Settings->Preferences->Incoming Intercom Settings.
2. The "Auto-Answer" field is enabled by default. The automatic answering feature is turned on for the IP phone for
answering Intercom calls. To disable this field, uncheck the box.
Note:
If the Auto-Answer field is not checked (disabled), the phone treats the incoming intercom call as a normal call.
3. The "Microphone Mute" field is enabled by default. The microphone is muted on the IP phone for Intercom calls
made by the originating caller. To disable this field, uncheck the box.
4. The "Play Warning Tone" field is enabled by default. If "Auto-Answer" is enabled, the phone plays a warning tone
when it receives in incoming intercom call. To disable this field, uncheck the box.
5. The "Allow Barge In" field is enabled by default. If "Allow Barge In" is enabled, the phone puts an active call on hold
and answers the incoming Intercom call. To disable this field, uncheck the box.
6. Click Save Settings.

Using Redial Key for "Last Number Redial"

The IP phone has an enhanced redial user interface that allows a user to quickly redial the last number that was dialed
out from the phone. You can:
• Press the REDIAL key twice to redial the last number dialed
• Press the REDIAL key once, scroll the list of numbers, then press the REDIAL key again to dial the number that displays
on the screen
The "last number redial" feature for the Redial key is static and is not configurable.
152
41-001387-05 REV03 – 07.2014