Additional Features
Configuring the Filter Key on an Assistant's Phone Using the Aastra Web UI
Use the following procedure to configure the Filter Key on an Assistant's phone using the Aastra Web UI:
Aastra Web UI
1.
Click on Operation-> Programmable Keys.
2.
Select a key that you want to use as a Filter activate/deactivate key.
In the "Type" field, select "Filter".
Note:
To utilize a single Filter key without a defined key value (so that you can manually activate and deactivate Executive Call Filtering
through the phone's UI) skip to Step 6.
3.
In the "Value" field, enter the Executive's phone or extension number (e.g. 4100)
4.
In the "Line" field, select the line for which you want to use the key functionality.
5.
Repeat Steps 2 to 6 for each respective Executive for whom you would like to assign a Filter key.
6.
Click Save Settings to save your settings.
158
41-001387-05 REV03 – 07.2014