Replacing The Carbon Brushes (Standard Motor) - Invacare STORM4MAX Service Manual

SERVICE MANUAL

8.11.2 Replacing the carbon brushes (Standard motor)

Note
Always replace all the carbon brushes on both motors.
WARNING: Danger of crushing!
The mobility device is very heavy. Injury hazard to hands and feet!
· You should seek help from a second person.
Requirements:
· 5 mm Allen key
· 6 mm Allen key
· 10 mm socket spanner
· 19 mm socket spanner
· blade screwdriver
· long wooden blocks, min. 14 x 14 x 30 cm
Removing the carbon brushes:
·
Switch off the mobility aid.
·
Remove the drive wheels as described in chapter 8.10.1.
·
Disengage the motor (1) by setting the engaging lever to "Push".
·
Loosen and remove all four plastic caps (3) using a blade screwdriver.
·
Note the fixing position and location of the carbon brushes.
Note
Used carbon brushes need to the refitted exactly in the same position from which they were taken
in order to guarantee optimum contact to the collector.
88
® 4
Invacare - STORM MAX