Invacare STORM4MAX Service Manual page 76

SERVICE MANUAL
·
Use a 5 mm Allen wrench to loosen the five hexagon socket head screws (4).
·
Remove the inner ring and outer ring (3) of the rim from the tire (1).
·
Remove the inner tube (2) from the tire.
·
Replace defective or worn parts, or repair these parts.
Installing a tire:
·
Insert the inner tube back into the tire.
NOTE
If the old tube is to be repaired and re-fitted and has become wet during repair work, powdering
the hose with some talcum powder can simplify the fitting procedure.
·
Re-position the rim halves (3) in the tire again. Make sure that the holes and threads for the
screws are positioned exactly on top of each other.
·
Inflate the inner tube with a little bit of air.
·
Insert the five hexagon socket head screws on the inner side of the wheel and tighten them
firmly.
·
Check that the tire is positioned correctly on the rim.
·
Inflate the tire to the prescribed pressure.
·
Check once more that the tire is positioned correctly on the rim.
·
Screw the valve cap back on.
·
Re-install the wheel.
76
® 4
Invacare - STORM MAX