Installing Accessories; Replacing The Safety Belt - Invacare STORM4MAX Service Manual

SERVICE MANUAL
9

Installing accessories

9.1

Replacing the safety belt

Requirements:
· 10 mm socket spanner
· 4 mm Allen key
Dismantling the safety belt:
·
Pull the end of the belt out of both belt guides (1).
·
Pull the restraining belt (2) out of the loop on the wheelchair.
·
Pull the complete restraining belt (2) out of both of the belt guides (1).
·
Remove the nut including the washer.
·
Replace the restraining belt (1).
Refitting the safety belt:
·
Refit the parts in reverse order.
·
Adjust the restraining belt individually to the driver by modifying the clearance of both of the belt
guides.
112
® 4
Invacare - STORM MAX