SERVICE MANUAL
9.3
Installing armrests
Requirements:
· 4 mm Allen wrench
· T30 Torx wrench
· 10 mm socket wrench
· Rubber hammer
·
Install the armpad as shown in the illustration above.
·
Install the armrest as shown in the illustration above.
·
Attach the armrest along with the holder (1) to the mounting bracket (2). Utilize the screws (3)
for this purpose. By selecting different holes in the mounting bracket (1), the depth of armrest
can be adjusted.
·
Insert the armpad into the armrest and secure it using the screw (4).
114
®
4
Invacare
- STORM
MAX