Table of Contents
Advertisement
®
Invacare
- STORM
8.14
Seat support and tilt module
8.14.1 Replacing the seat support with manual tilt module (till Dec. 2010)
WARNING: Danger of crushing!
The seat/seat support is very heavy. Injury hazard to hands and feet!
· You should seek help from a second person.
Requirements:
· T40 torx wrench
· oblique pliers
· cable ties
Dismantling the seat support:
·
Remove the legrests.
·
Remove the armrests.
·
Remove the seat cushion.
·
Remove any existing cable ties holding the cables on the remote or lighting. Remove the
cables from the stuck on clamps.
·
Loosen the cap nuts of the headlight mountings using an 8 mm jaw spanner (see
chapter 8.7.4).
·
Put the headlight and the mounting in a safe place on the rear part of the battery compartment
cover.
·
Remove the connecting cable to the chassis from the remote or from the optional actuator
module.
·
Remove the cable or cables so that there is no longer any cable connection between the seat
and the chassis.
4
MAX
SERVICE MANUAL
97
Advertisement
Table of Contents
