Installing Calf Supports; Further Accessories - Invacare STORM4MAX Service Manual

®
Invacare - STORM
9.5

Installing calf supports

Requirements:
· 5 mm Allen wrench
· T30 Torx wrench
· 10 mm socket wrench
·
Install the calf supports as shown in the illustration above.
·
Attach the fixation bracket (1) of the calf support to the wheelchair using the hexagon socket
head screws (2).
·
The angle of the calf supports can be adjusted by loosening the screws (3). The cover (4) has
openings, so that the screws are accessible.
9.6

Further accessories

Note
The installation instructions for additional accessories are available at your Invacare® specialist
supplier or directly from Invacare
4
MAX
®
.
SERVICE MANUAL
117