®
Invacare
- STORM
10.2.2 Adjusting the seat depth
Note
The seat depth can be adjusted to three different positions.
Requirements:
· 4 mm Allen key
· 8 mm jaw spanner
· Oblique pliers
· Cable ties
Note
Certain holes in the seat support must be used for the screws depending on the desired seat
depth. It may possibly be necessary to replace the seat support plates.
·
Use the following illustration and table to determine which holes must be utilized for the desired
seat depth. Additionally, a sticker is attached to the frame that indicates the appropriate holes
for the three seat depths.
Sitztiefe
Verwendete Löcher in
in cm
Sitzrahmen
56
59,5
63
4
MAX
3 & 4
2 & 3
1 & 2
SERVICE MANUAL
123