Cable Routing - Invacare STORM4MAX Service Manual

SERVICE MANUAL
8.6.1

Cable routing

Requirements:
· 4 mm Allen key
· oblique pliers
· cable ties
·
Remove the rear and the centre cover as described in chapters 8.1.1 and 8.1.2 .
·
Guide the cables inside of the cover over the cable link (1).
·
Secure the cables with the cable clamps (2).
·
The motor cables are fitted with protection covers (2) and are guided out of the front cover
through recesses on the side.
·
Cables that lead to the seat (upper actuator module, remote, headlight), are guided out of the
front cover through an upper left recess (3).
·
Make sure the cable has enough play so that all movable parts can move freely without
stretching, clamping or abrading the cable.
·
Lay the cables in the same way under the seat and to the remote. Fasten the cables with the
prescribed cable clamps or cable ties respectively.
62
® 4
Invacare - STORM MAX