®
Invacare
- STORM
8.7
Lighting unit
Note
There is only one LED lighting system.
8.7.1
Replacing the front LED (LED lighting unit)
·
It is not intended for an individual LED to be replaced. Replace the entire lighting unit as
described in chapter 8.7.2.
8.7.2
Replacing the complete front headlight (LED lighting unit until 03/2012)
Requirements:
· 8 mm spanner
· 4 mm Allen key
· Diagonal pliers
· Cable ties
Removing the front headlight:
·
Remove the rear and centre cover as described in chapters 8.1.1 and 8.1.2.
·
Carefully note the location of the cable and the connection locations of the various plugs. Either
mark each plug and socket, or take a photograph with a digital camera.
·
Loosen the cable leading to the lighting PCB from the front headlight affected (2).
·
Open the cable clamps (1), remove all cable ties and pull the cable out of the mobility aid.
4
MAX
SERVICE MANUAL
63