Lift the handset and press the speed dialing key/MEM
dialing destination between 0 and 9.
Repertory keys
Three repertory keys
Storing
Lift the handset and press the SET key
SET key
again. Press one of the 3 repertory keys
stored on this repertory key. Replace the handset.
•
A dialed number is not stored if it contains more than
15 digits.
•
You can delete the number assigned to a specific
key by overwriting it.
•
Dial pauses (approx. 3.6 seconds - not in first
position) can be inserted by pressing the
These pauses are included in the speed
dialing/name keys and redial memory and are
required in the case of certain PABXs (e.g. 0
2368).
•
The keys
the dial type, but can only be selected in the case of
DTMP signaling.
are available for up to 32 digits each.
. Enter the speed
and
are stored regardless of
. Dial the number and press the
. The number is now
key.