2N Helios IP Audio Kit Installation Manual page 23

about 10s
Hold RESET
The following network parameters will be set after restart:
IP address:
Nework mask:
Default gateway:
Follow the instructions below to switch on the Dynamic IP address mode (DCHP
OFF):
Press the RESET button.

Wait until the red and green LEDs on the device come on simultaneously

(approx. 10s).
Wait until the red LED goes off (approx. 5s).

Wait until the green LED goes off and the red LED comes on again (another

5s).
Release the RESET button.

about 10s
Hold RESET
Follow the instructions below to reset the factory default values:
Press the RESET button.

Wait until the red and green LEDs on the device come on simultaneously

(approx. 10s).
Wait until the red LED goes off (approx. 5s).

Wait until the green LED goes off and the red LED comes on again (approx.

5s).
Wait until the green LED goes off (another 5s).

Release the RESET button.

about 10s
5 s 5 s
192.168.1.100
255.255.255.0
192.168.1.1
5 s
5 s
Hold RESET
Electric Installation
5 s
5 s
5 s
5 s
5 s
2.3
20