DRAKON 50 NKD
FUEL CAP
During this procedure do not use heat and
keep sparks and naked flames well clear of
the scooter. If the tank is left without the fuel
level sensor fitted for a prolonged period,
plug the hole to prevent the accumulation
of petrol vapour in the workshop.
•
Undo the screws (V3) and after opening the cap, undo
the screw (V).
Pay attention to the arrangement of the
screws (V3). Watch out for the reduction ring
located under the cap.
LEFT AND RIGHT REAR FAIRING
•
(Remove seat).
•
Undo screws (V2)
•
Undo screw (V) then remove rear fairing (A) pulling
towards rear of scooter.
FRAME AND RUNNING GEAR
DISASSEMBLY
05189074_1
V
05189303_1
43
03/06
V
V
3
V
2
A
7
V
3
05189080_1
A